Omnidots Vibration Monitor
Charging the Omnidots Battery
When fully charged the Omnidots Vibration Monitor can last up to 6 weeks. neXtrack recommends that the Omnidot Battery be fully charged prior to use and recharge every 2 - 3 weeks to be cautious.
The Omnidot Battery can take up to 20hrs for a full charge.
1. If the battery still has power, turn it off by pressing the grey button on the battery
and the lights go through a sequence to indicate it is shutting down.
2. Once powered down, Using the power pack and lead in the case, attach the lead to
the port on the underside of the battery that indicates for charging.
3. Plug the power plug into a power outlet and switch the power on.
4. The charging icon on the battery will indication when the battery is fully charged.
5. If completely flat this battery can take approx. 2 days to fully charge
Detaching Onsite to Recharge
If you need to recharge the Omnidots Vibration Monitor Battery after its initial use, you can take the battery without having to remove the Vibration Monitor.
1. If you mounted the battery you will need to remove the 2 screws on the sides of the
brick shaped Battery, if it is just placed near the Vibration monitor go onto next step.
2. Disconnect the Vibration Monitor cable at the blue port on the battery carefully.
3. Follow steps 1 – 5 above in ‘Initial Charge Prior to use’.
4. Once battery is fully charged you can reconnect and remount in place.