HOW TO SET UP THE PORTABLE BATTERY

 Set Up Instructions

What you will receive:

When the equipment arrives that your company ordered, you should receive:


  • Hardcase fitted with vents and cord whole.
  • Charger for battery
  • Battery Pack

 


 

How to set up the Portable Battery Pack for use

Once you have the HIP-Y Controls Monitor situated in an appropriate spot and set up on the Tripod place the portable battery pack close to the tripod.

 

On the rear of the case is a plastic cord grommet. From inside the case pop it out.



Push down on the striped opening of the grommet and twist to the side so the cord opening is open.



 Place the HIP-Y Controls Monitor power lead through the hole in the case.

 

 

Place the open cord grommet over the hole and press it in securely so that the cord can move freely in the opening.

 

 

Once you have connected the power lead to the HIP-Y Controls Monitor, being careful not to over screw the plug in, you can go ahead and plug the power plug into the portable battery.

 

 

To turn on the power on the portable battery pack, press the button

 

 

Check the site dashboard to ensure the HIP-Y Controls Monitor is displaying readings. – Make sure your gateway is on.

 

Charging the Portable Battery Pack

When you receive the Portable Battery Pack it is placed securely in the case and charged prior to you receiving it.

 

The Battery does not need to be removed from the case to be charged.

 

Plug the Charger into either one of the charging ports.

 

 

Plug the charger into the wall socket or extension lead. 

 

Press the button beside the LCD screen to view how charged the power pack is.

 

 

To conserve power, turn the Portable Power Pack off daily after use. 

 

It would be recommended to charge the Portable Power Pack at least every second day.