How to Select a Time Period on a Graph Widget
As a Builder & Contractor
Quite often on the Dashboard is a Graph which shows the levels of Dust, Noise, Temperature, and Humidity.
These are set to view the last 8hrs.
You can view different time ranges by following these instructions.
In this example we are using a Builder profile but it is all the same steps.
Selecting a Time Period
To view the Graph, go to the SITE dashboard by selecting ‘SITES’ from the side menu.
Click on the site you site you want to access.
In this example we’re choosing ‘De-Momo’ site.
You should now be on your main dashboard to the site you selected.
Here you can see if you have any widgets on your dashboard.
These instructions require the Graph dashboard.
By default you can see the last 8hrs. To see a different time period, click on the CLOCK icon.
A small window will pop open.
Here you can select a time range by clicking on the HISTORY tab.
In the HISTORY tab select the ‘TIME PERIOD’ radio button
A ‘From’ and ‘To’ date & time will appear.
Click on the ‘From Date’ and a calendar will appear.
Click on the date you want.
Click on the ‘Time From’ and a clock will appear.
Please note this is 24hr time.
Select the time you want.
Repeat these steps for the ‘To Date’ and ‘To Time’.
Click the [Update] button once the time period has been selected.
You can now see on the graphs the time period selected.
To change this back to the default 8hrs, click on the CLOCK icon again.
Click on the ‘Real Time’ Tab
It should be preset to 8hrs.
Click the [Update] button.
If it does not default to 8hrs please follow the steps below
- Make sure the ‘Advanced’ is green.
- Click the up or down arrows in the hour section until you hit ‘8’
- Click the [Update] button.
- If you cannot get this to work, please text support on 0482 092 067
Your dashboard should be returned to normal.
